HOWTO: Recover a bricked IOS device
Get some fine gauge wire, like wirewrap wire, and solder one to the pad for C97 that has a via about 7 mm away. Solder another wire to the trace from pin 35 on the CPU (you'll need to scrape the solder mask off the trace). Then connect the other ends of those wires to a 1.8V to TTL level shifter IC which you'll connect to an RS-232 driver like the MAX232 or maybe just use one of those logic to USB serial converter boards. Then you can fiddle with the baud rates and, if you catch it at the right time, you can't interrupt the boot sequence via the serial terminal.
/making shiat up.
(You must be logged in to vote)
4/7/2016 8:55:06 PM
Likes: 0 Dislikes: 0
This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner. We are making such material available in our efforts to advance understanding of environmental, political, human rights, economic, democracy, scientific, and social justice issues, etc. We believe this constitutes a 'fair use' of any such copyrighted material as provided for in section 107 of the US Copyright Law. In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those who have expressed a prior interest in receiving the included information for research and educational purposes. For more information go to: http://www.law.cornell.edu/uscode/17/107.shtml
. If you wish to use copyrighted material from this site for purposes of your own that go beyond 'fair use', you must obtain permission from the copyright owner.